Tile and grout cleaning jobs are done with these four components. Emulsifier(detergent), pressure, heat and extraction or vacuum additional info. These four elements will eliminate any tile and grout cleaning service from consideration. Here’s why.

The use of water will not be sufficient to get the job done. You must ensure that the tile and grout company you hire has enough detergent to complete your job. The detergent is used to loosen dirt and grease molecules on your tiles and grout. If you didn’t use this, you might also throw water on oil and get the result you expect.

One of the most important is pressure, which is also the case with detergent. By using a hose, you can remove surface dirt. You can use a power washer to get it looking brand new. The same is true for cleaning grout. Grout may be made from cement or is porous. You should not use a high-pressure washer on your kitchen floors unless your intention is to bring the swimming pool indoors. But you need more than just steam pressure.

Start with around 1200 pounds per square inch and work your way up. If the carpet cleaners’ machine can’t deliver that pressure, you should eliminate them from your list. Keep them if they’re doing a good job. If you want to do your tile and grout, then you will need to find someone else. The pressure is crucial, because it helps to loosen dirt and grease. Together with the detergent it works to push deep into the pores of grout.

A scrubbing scrub brush will not be able to do this. A brush can only get the uppermost layer, and then it either pushes dirt further down or moves it to another surface. In most cases, you will see results that are satisfactory, but only for a short time, as the dirt that was pushed to the bottom will return. I can assure you that there are bacteria and germs growing in your tile grout. Grout can be compared to a sponge. It will soak up everything.

NAP:
Ultra Brite Carpet & Tile Cleaning North Shore
79-83 Longueville Road, Lane Cove NSW 2066
(02) 8015 5143